Tag Archive: sequencer


Follow1

One of the powerful but hidden delights of Gener8 is a sequencing method which can quickly produce small Clip sequences in a live situation: Follow Actions

So, here’s a short tutorial to help you master it.

Some salient points to remember:

  • Each Clip can have its own ‘Follow Action‘.
  • A Clip’s ‘Follow Action‘ will occur a set number of beats after that Clip has been triggered.
  • There are a number of different types of ‘Follow Actions‘ which can be applied: Increment, Random, Other, etc.

Step 1 – Prepare your Clips

To do any kind of sequence of Clips, we’re going to need some Clips to sequence. So let’s get started:

  1. Spark up Modul8, make sure you have a ‘New Project’ so things don’t get confusing.
  2. Open up the Gener8 Launchpad and Editor modules (these are the core modules and you’ll need to run these together).
  3. Once the Launchpad is ready, create yourself a few Clips on the 1st layer. To do this simply click on the preview panels on the empty Clip holders. NOTE: It’ll be useful for the sake of this tutorial to create your Clips in the same clip-slots as the image below.

Follow2

Step 2 – Assign Media to your Clips

You can skip this step, but the final result will obviously be more effective with media!

  1. Chuck some of your favourite media in your Media Panel. (select a few files from a Finder window and drag/drop them into the Media Panel)Follow3
  2. Activate a Gener8 Clip.Follow4
  3. Select a media for that Clip from the Media Panel.Follow5
  4. Activate the next Gener8 Clip (make sure the Clip trigger has stopped flashing – a useful tip when you are assigning a lot of media’s is to turn off the quantise to speed the process up)Follow6
  5. Select the next media for the second Clip. 🙂
  6. And so on, repeat until all your Clips have media assigned to them.

Tip: You can also change the media assigned to a Clip in the Clip Inspector (top left – Trig pane). There is a value for ‘Media’ number there.

Step 3 – Create a Follow Actions

As I mentioned before, there are quite a few different types of Follow Actions, but first we will have a play with the ‘Increment’ action.

  1. Select the topmost Clip by clicking on the media preview of the Clip in the Launchpad (it doesn’t need to be active, you can do this on the sly during your performance.)  Selected Clips have an orange square around them.
  2. Okay, the Clip Inspector will now be open on the top left of the Gener8 Launchpad, and will be displaying the properties of the selected clip. Select the ‘TRIG’ pane to view the Follow Actions settings.Follow7
  3. Next, set the Follow Actions menu to ‘Increment’. You will see a further setting appear, we’ll leave this at the default setting of ‘1’ for now. Time for some explanations…Follow8

How Does a ‘Follow Action’ Work?

Okay, now we have a Follow Action in place (in the above instance it’s an ‘Increment’ action), the next time this Clip is triggered, it will send out a secondary trigger which will occur a set number of beats after the initial Clip is triggered. You have options for which Clip is triggered next, and how many beats will occur before the ‘follow trigger’ happens.

You can only:

  • Trigger Clips in the same layer.
  • Delay triggers by whole beats.

Everything else is pretty much game, but remember – changes to a Clip’s Follow Actions settings will not take effect until that Clip is re-triggered.

Step 4 – Let’s make a Follow Loop.

We have an Increment action on our 1st Clip, let’s see if we can make a simple sequence which works in a loop.

  1. Select Clip 2 and make a further ‘Increment’ action for this Clip, only this time let’s set the ‘INCR.’ value to ‘2’.Follow9
  2. Now select Clip 4 and again make another ‘Increment’ action. This time we will set our ‘INCR.’ value to ‘-3’.
  3. Re-trigger Clip 1 and sit back while you sequence plays…Follow10

So, how is this working?

Our 1st Clip has an increment value of 1, which means it will trigger the Clip ‘1’ space below it, which is ‘Clip 2’.

Clip 2 has an increment value of ‘2’, so it will trigger the Clip ‘2’ spaces below it: ‘Clip 4’.

Clip 4 has an increment value of ‘-3’, so it will trigger the Clip 3 spaces above it: ‘Clip 1’.

Clip 1 has an increment value of ‘1’, so…. are you getting the idea?

Positive incremental value trigger Clips below the current Clip. Negative incremental values trigger Clips above the current Clip. Zero values simply re-trigger the same Clip.

Play around with the settings.

The most enjoyable way to learn something is through play, so have a go at changing the values until you’re happy with how they behave.

  • Change the ‘beats’ value to adjust the timing of the Follow Action.
  • Change the style of Action to get familiar with the different results.
  • Make sure you make some other pages to see how far this can go.

What are all these settings?

Okay, explanation time again. Here’s a little run through all the options.

  • Increment – Triggers to a specific Clip by using a numeric value (positive = move down, negative = move up, zero = re-trigger).
  • Random (All) – Triggers any Clip on the layer, on any page.
  • Random (Page) – Triggers any Clip on the same page.
  • Other (All) – Triggers any Clip on any page except itself.
  • Other (Page) – Triggers any Clip on the same page except itself.

Okay everyone, I’ve spent enough time on this now and it’s reached that lovely point of readiness. 0.6 is finally here!

Gener8-Logo-3d

Tons of updates and improvements. More bug fixes than I can remember.

It’s been nearly a year since the last release (where did all that time go?), and many of those hours have gone into refining almost every function of this module suite.

NEW FEATURES IN 0.6

  • Recordable and editable Timeline for clip changes.
  • Full native Novation Launchpad support.
  • Native Korg Nano control support.
  • Syphon input support.
  • Support for new Modul8 2.7 keywords.
  • Enhanced Scrub bar for stutter free scratching.
  • Clip transition auto-fade feature. (Available in the Editor preferences)
  • Improved BPM Tap functionality.
  • Option to disable Auto-Loop function during Logical Render. (Available in the Editor preferences)
  • Deselect envelope points by clicking off the selection in the Editor timeline.
  • Edit the keyword of envelopes by text input (useful for envelopes that are difficult to pick in the main Modul8 UI)

Timeline Module:

  • Record your Gener8 Launchpad performances.
  • Dedicated module to view and edit your recording.
  • Select recorded clip events, drag to adjust timing, or delete them.
  • Adjust loop range from the timeline.
  • Zoom in for fine editing of your performances
  • Beat snapping. When dragging clip events they will stick to the nearest beat for easy editing.
  • Quantise function to tidy up your performance.
  • Beat/seconds counter display.

Novation Launchpad Support:

  • Create, Select or Trigger clips in Gener8 from the Novation Launchpad
  • Novation Launchpad displays all active clips automatically – no MIDI mapping required.
  • Select or create layers
  • Scroll pages
  • Tap BPM
  • Start/Stop Clock
  • Arm Timeline recording
  • Dedicated page for selecting media.
  • Works alongside Ableton Live (User 2 Mode)

Korg NanoKonrol Support:

  • Works in nanoKontrol Scene 3, leaving you plenty of space to map you own controls.
  • Toggles between A/B layers (top push button 9)
  • Adjust layer transparency/alpha values (faders 1-5)
  • Adjust layer audio volume (knobs 1-5)\
  • Select active row (knob 9)
  • Trigger clip on active row (bottom buttons 1-5)
  • Trigger entire active rows (bottom button 9)
  • Dedicated crossfader slider (fader 9)
  • Show/Hide layers (top push buttons 1-5)

If you’re on the mailing list you will receive a download link, and if you’re not join up and I’ll send you the goods.

I’ll be posting more info about this update over the next few weeks so keep your eyes peeled. So much to teach you all. I am in the process of building more tutorials and updating the manual at last too.

Hope you like it!

8 )

Going back sometime last year, I had the fortune of being passed one of the new Faderfox controllers by Boris Edelstein (creator of Modul8). The controller is Boris’s own design and is being manufactured by Faderfox. For my part I was asked to come up with some modules for the device. Which I have done.

IMG_1292

User1Map

And here is a screenshot of the mod I have made.

For those of you on the ball you will know that with the release of M8 2.7 there is some simple integration of for the controller itself (including feedback for the LED’s etc).

What my module does is go much further, allowing full control of all your maps, some system set-ups for useful & complex procedures (media selection, syphon sources, colour swatches, sequencing), and allows you to easily produce an an infinite amount of patches, which can then be exported to XML.

For those of you interested you can download the manual.

The module will be available in the online modules library (through the app itself under the Modules menu).

Okay everyone, so during the course of this beta development, I have discovered a few of the bugs in my mods were ones I’d copied from other modules, while I was getting to grips with coding in Python.

Okay, so yes, this is a bit annoying, but now that I have the solutions, I can pass them through to some of the other mods, and the world will be a much happier place. ; )

These updates mainly improve the way the module saves its data into your Modul8 project file. But there have been some other advances too, like global LFO inputs in the Filter module’s animation section, and also, most of these modules will now check for updates on start-up.

So, there we have it. I have updated the following modules:

(at) BPM (global)
(at) Filter (layer)
(at) LFO (global)
(at) LFO Router (master)
(at) LFO Router (layer)
(at) Sound Router (master)
(at) Sound Router (layer)
(at) Layer Sequence 10×16

Most of these are available from the Modul8 online library (open Modul8, click the Modules menu, then select ‘Online Library’). You will find them in the public section.

Unfortunately the (at) Filter module does not like to upload to the online library for me, so the version there is outdated.

So here is a zip file containing all the updates. Download Updates.

I’ve also included an update to garageCube’s BPM Router module in this update (again, improved saving functionality).

For further detailed information about these updates you could check out my post on the garageCube forum, which explains where we have all been going wrong. Read Forum Post.

Layer Sequencer Bug Fix

An issue which created a conflict between the (at) Layer Sequencer v2.2 module and the Gener8 modules is now resolved.

If you have been using the Layer Sequencer in conjunction with Gener8, you will probably have experienced some freezing of the Clips after triggering them in the Launchpad module.

I advise anyone running Layer Sequencer v2.2 to update to the new version in the online modules library (open the Modul8 app, click the Modules menu, then select ‘online library’, version 2.3 will be available in the public section).

%d bloggers like this: